Talbert's 35CC-HRG Lowbed Trailer features a removable hydraulic gooseneck for fast and easy equipment loading and unloading. Its optional features include fixed or platform goosenecks, various front and rear ramps, as well as multiple swing radiuses, deck lengths and widths. The trailer can be equipped with a beavertail and ramp so users can drive equipment over the rear of the trailer rather than detach the unit’s gooseneck. This allows for fast equipment loading and unloading in confined areas.
The 35CC-HRG is part of Talbert’s Close-Couple Lowbed Series. The trailer’s two axles are close coupled and can be designed to accept an optional pin-on axle for loads requiring three axles in a row. The overall length of the 35CC-HRG is 43 feet, 9 inches, which includes a 24 foot long deck that is 8 feet, 6 inches wide and a 9 foot, 9 inch rear bridge section. Swinging outriggers provide 12 inches of additional width on each side of the deck to accommodate oversized equipment. The 35 ton CC-HRG is rated in half the deck length to safely meet concentrated load requirements as high as 70,000 pounds.
For more information, please visit www.TalbertMfg.com.