Tired of edging sidewalks and curbs with hand shovels? The new Sidewalk and Curb Edger skid steer attachment from Ground Effect can edge up to 3/4 of a mile each hour. Stop spending hours edging curbs and gain efficiencies by putting the Sidewalk and Curb Edger to use in your operation. Users say that it may not be a tool you use every day, but the quality of the product combined with the time savings of each operation results in a big return on investment.
The T3 Driver can drive t-posts and pipes up to 3-inch O.D. and, with several quick attach mounting options, will make your next job a breeze. This vehicle-mounted post driver operates on vehicles with hydraulic flow up to 30 GPM. Posts are fully contained to prevent kick out and protected from damage by the strike plate. The mounting platforms are designed to withstand substantial down pressure from the host vehicle to reduce drive time. Let the vehicle carry the weight and get your next job done right from the comfort of the cab.
LAFORGE presents VersaDeck™, the truly versatile mobile platform, deemed one of the year’s most innovative designs in engineering products or systems for the food and agriculture industries in 2014.
Designed and manufactured in Cedar Falls, Iowa, this multipurpose platform has been developed to bring versatility, convenience and independence to the user.
It is designed to be carried by a forklift or tractor, either on the rear or front 3-point hitch or on the front loader. With its floor plate dimensions of 96- x 72-inches and loading capacity of 3,300 lbs., it can carry anything from a small tool box to an ATV. The VersaDeck™ is also available in a smaller size with a floor plate dimension of 60- x 72-inches (only available to be carried by forklift).
All the details were taken care of to make VersaDeck™ user friendly:
- Elevated work platform
- Able to attach tool boxes and tools for a mobile workshop
- Front bevel edge and removable doors
- Removable door latches and posts
- Numerous tie down points and strapping holes
- Optional brackets for vise, winch and battery
- Option OSHA approved work surround for elevated work
- Easily transport materials and cargo on the worksite
The M3 concrete mixing bucket is the best solution to manufacture concrete at any time where it is required. It is suitable for skid-steer-loaders, backhoe loaders, wheel loaders and hydraulic excavators. Equipped with paddle-type mixing arms, a homogeneous rapid mix is ensured. The concrete mixing bucket is equipped with a bottom and helix made of wear resistant HB400 steel, fixed safety rounded grill with bag breaker, electric valve, hydraulic hoses with couplers, electric connection kit, hydraulic opening of the bottom through a cylinder with covered rod, unloading pipe for bottom unloading and a side chute for side unloading are included. Capacities from 5-76 cu.ft.